How To Install Outdoor Led Strip Lighting?
Outdoor led strip lighting is very common in our lives, especially in amusement parks or large shopping malls. Outdoor led strip lighting are decorated. Of course, the family may also install led light strips, the effect of decoration is also very beautiful. Regarding how to install outdoor led strip lighting, let's understand step by step.

Installation method of outdoor led strip lighting

1. Outdoor led strip lighting installation, first of all, the waterproof and firm installation of the light strip is the most important. The installation of led light strips is mainly subject to wind and rain. If 3M glue is used to fix it, the 3M glue will decrease over time and cause the LED light strip to fall off. Therefore, outdoor installation often adopts card slot fixing and requires cutting The method is the same as the indoor installation, but it needs to be equipped with waterproof glue to consolidate the waterproof effect of the connection point. Then use a special fixing clip to fix it, you can use an electric hammer to drill the eye, use a plastic expansion tube and screw to fix the clip.

2. Wiring method of outdoor led strip lighting (power connection method). The general voltage of the LED strip is 12V DC, so a switching power supply is required. The size of the power supply is determined according to the power and connection length of the LED strip.

3. The wiring method of the monochromatic 5050 SMD LED strip is to distinguish the positive and negative poles. Generally, we provide a welded power plug and plug it directly into the provided strip power supply. If you do not want each LED strip to be Use a power supply to control, you can buy a larger power switching power supply as the main power supply, and then all the LED lights with input power supplies are connected in parallel, and the main switching power supply is used to supply power. This can be controlled centrally, but the inconvenience is that the lighting effect and switch control of a single LED strip cannot be realized.

4. If a large power supply is used, the controller connects the LED marquee strip and the RGB magic light strip to achieve a changing effect. When wiring, the magic light strips generally have a common anode, that is, there is one on the strip Yes +12V The others are negative RGB and three negative electrodes. The wiring is as shown in the above figure and the control distance of each controller is different. Generally speaking, the control distance of the simple controller is 10-15m, and the control distance of the remote controller is 15 -20m, the longest distance can be controlled up to 30m. If the connection distance of the LED strip is long, and the controller cannot control that long strip, it is necessary to use a power amplifier to tap.

About the installation method of outdoor led strip lighting, it is similar to the installation method of indoor LED light strips. Specific problems are analyzed in detail. I hope the above methods can help you.